This is an area of fire safety that has been rapidly evolving over the last 20 years.
Heat Detectors are designed to protect property, not life. There are certain fire-protection applications where smoke detectors are not suitable, such as non-life-safety installations where the environment has too many airborne particulates due to excessive steam, moisture, dust, humidity or temperature, such as in attics, garages, warehouses, storage facilities, elevator machine rooms and electrical closets.
Smoke detectors applied in those environments are cost prohibitive from a maintenance standpoint.
Heat detectors can be electronic or mechanical. Electronic heat detectors use a thermistor as the primary heat sensing device. A thermistor is a component that changes resistance with temperature.
Typically, electronic heat detectors have additional features, such as LED indicators that blink to indicate proper standby operation.
Mechanical heat detectors are bi-metallic or pneumatic. Bi-metallic heat detectors have a strip consisting of two dissimilar metals. When the strip is heated, the metal distorts and closes a contact. These detectors tend to be very inexpensive. Pneumatic heat detectors, on the other hand, use an air chamber that is sealed with a moveable diaphragm.
When the air inside the sealed chamber gets warm, the chamber expands and distorts the diaphragm. This, in effect, puts pressure on a set of contacts, which makes an electrical connection.
Pneumatic detectors are often used in harsh environments because they can be sealed against corrosive elements. In general, mechanical heat detectors are less expensive than electronic heat detectors; however, because they have a fixed temperature, they are not restorable after a field test.
Heat detectors can be fixed-temperature or rate-of-rise. Fixed-temperature heat detectors are designed to alarm at a particular temperature. Because of thermal lag, however, if the rate of temperature rise is fast, the detector may actually alarm when the room temperature is higher than the set point.
Furthermore, these detectors are not restorable after a field test. The alarm is destroyed. A rate-of-rise component is sometimes added to a fixed-temperature design. This way, when either the fixed temperature or a pre-set temperature increase rate is exceeded, the detector will alarm.
Heat detectors with a rate-of-rise feature tend to produce a higher level of protection in many applications, but should be used with caution.
This may be the case in an attic, for example. Additionally, these detectors are restorable.
They reset to a non-alarm condition after a field test. Heat detectors can be spot type or linear. That is, the sensing element is in one physical location. Contrast that with linear heat detection, where the sensing element is spread out over a large physical area.
General Monitors FLH Multi-spectrum Infrared Flame Detector Infrared Detector that provides superior false alarm immunity The FLH is an advanced multi-spectrum infrared (MSIR) flame detector that provides superior . A heat detector is a fire alarm device designed to respond when the convected thermal energy of a fire increases the temperature of a heat sensitive element. The thermal mass and conductivity of the element regulate the rate flow of heat into the element. All heat detectors have this thermal kaja-net.com detectors have two main classifications of operation, "rate-of-rise" and "fixed temperature". 1. Heat Detectors are designed to protect property, not life. There are certain fire-protection applications where smoke detectors are not suitable, such as non-life-safety installations where the environment has too many airborne particulates due to excessive steam, moisture, dust, humidity or temperature, such as in attics, garages, .
In linear heat detection, a special multicore wire or cable is utilized. The cable has two conductors that are fitted with an insulating jacket with a specific melting point.
When the temperature increases enough, the insulating jacket separating the conductors melts and they come into contact with one another, shorting out.
This short can be detected. These linear heat detection cables can be hundreds of feet in length, making them ideal for conveyor or cable tray applications.Anixter is your source for Smoke and Heat Detection products.
The Honeywell W3 is a wireless heat and smoke detector. The W3 utilizes a photoelectric smoke chamber for smoke protection as well as a temperature sensor that can detect high temperatures ( Honeywell’s W3 is a 3V lithium powered, photoelectronic smoke/heat detector with a built-in wireless transmitter.
Since there are no holes to drill or wires to run, you can preserve the beauty of. Shop our selection of Heat Alarms in the Electrical Department at The Home Depot.
Product Features to fixing basic energy leaks and comes with the thermal leak detector. Set to alarm when ambient temperatures reach a fixed point, typically indicating a fire, fixed-temperature heat detectors are a highly cost-effective solution for many property protection applications.
If rapid response to fire is vital, rate-of-rise heat detectors are an ideal solution where rapid temperature increases would only be caused by a fire .